由 dawei
Redis作为缓存使用时，一些场景下要考虑内存的空间消耗问题。Redis会删除过期键以释放空间，过期键的删除策略有两种：
ASP站长网惰性删除：每次从键空间中获取键时，都检查取得的键是否过期，如果过期的话，就删除该键；如果没有过期，就返回该键。
定期删除：每隔一段时间，程序就对数据库进行一次检查，删除里面的过期键。
另外，Redis也可以开启LRU功能来自动淘汰一些键值对。
LRU算法
当需要从缓存中淘汰数据时，我们希望能淘汰那些将来不可能再被使用的数据，保留那些将来还会频繁访问的数据，但最大的问题是缓存并不能预言未来。一个解决方法就是通过LRU进行预测：最近被频繁访问的数据将来被访问的可能性也越大。缓存中的数据一般会有这样的访问分布：一部分数据拥有绝大部分的访问量。当访问模式很少改变时，可以记录每个数据的最后一次访问时间，拥有最少空闲时间的数据可以被认为将来最有可能被访问到。
举例如下的访问模式，A每5s访问一次，B每2s访问一次，C与D每10s访问一次，|代表计算空闲时间的截止点：
~~~~~A~~~~~A~~~~~A~~~~A~~~~~A~~~~~A~~|
~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~|
~~~~~~~~~~C~~~~~~~~~C~~~~~~~~~C~~~~~~|
~~~~~D~~~~~~~~~~D~~~~~~~~~D~~~~~~~~~D|
可以看到，LRU对于A、B、C工作的很好，完美预测了将来被访问到的概率B>A>C，但对于D却预测了最少的空闲时间。
但是，总体来说，LRU算法已经是一个性能足够好的算法了
LRU配置参数
Redis配置中和LRU有关的有三个：
maxmemory: 配置Redis存储数据时指定限制的内存大小，比如100m。当缓存消耗的内存超过这个数值时, 将触发数据淘汰。该数据配置为0时，表示缓存的数据量没有限制, 即LRU功能不生效。64位的系统默认值为0，32位的系统默认内存限制为3GB
maxmemory_policy: 触发数据淘汰后的淘汰策略
maxmemory_samples: 随机采样的精度，也就是随即取出key的数目。该数值配置越大, 越接近于真实的LRU算法，但是数值越大，相应消耗也变高，对性能有一定影响，样本值默认为5。
淘汰策略
淘汰策略即maxmemory_policy的赋值有以下几种：
noeviction:如果缓存数据超过了maxmemory限定值，并且客户端正在执行的命令(大部分的写入指令，但DEL和几个指令例外)会导致内存分配，则向客户端返回错误响应
allkeys-lru: 对所有的键都采取LRU淘汰
volatile-lru: 仅对设置了过期时间的键采取LRU淘汰
allkeys-random: 随机回收所有的键
volatile-random: 随机回收设置过期时间的键
volatile-ttl: 仅淘汰设置了过期时间的键---淘汰生存时间TTL(Time To Live)更小的键
volatile-lru, volatile-random和volatile-ttl这三个淘汰策略使用的不是全量数据，有可能无法淘汰出足够的内存空间。在没有过期键或者没有设置超时属性的键的情况下，这三种策略和noeviction差不多。
一般的经验规则:
使用allkeys-lru策略：当预期请求符合一个幂次分布(二八法则等)，比如一部分的子集元素比其它其它元素被访问的更多时，可以选择这个策略。
使用allkeys-random：循环连续的访问所有的键时，或者预期请求分布平均（所有元素被访问的概率都差不多）
使用volatile-ttl：要采取这个策略，缓存对象的TTL值最好有差异
volatile-lru 和 volatile-random策略，当你想要使用单一的Redis实例来同时实现缓存淘汰和持久化一些经常使用的键集合时很有用。未设置过期时间的键进行持久化保存，设置了过期时间的键参与缓存淘汰。不过一般运行两个实例是解决这个问题的更好方法。
为键设置过期时间也是需要消耗内存的，所以使用allkeys-lru这种策略更加节省空间，因为这种策略下可以不为键设置过期时间。
近似LRU算法
我们知道，LRU算法需要一个双向链表来记录数据的最近被访问顺序，但是出于节省内存的考虑，Redis的LRU算法并非完整的实现。Redis并不会选择最久未被访问的键进行回收，相反它会尝试运行一个近似LRU的算法，通过对少量键进行取样，然后回收其中的最久未被访问的键。通过调整每次回收时的采样数量maxmemory-samples，可以实现调整算法的精度。
根据Redis作者的说法，每个Redis Object可以挤出24 bits的空间，但24 bits是不够存储两个指针的，而存储一个低位时间戳是足够的，Redis Object以秒为单位存储了对象新建或者更新时的unix time，也就是LRU clock，24 bits数据要溢出的话需要194天，而缓存的数据更新非常频繁，已经足够了。
Redis的键空间是放在一个哈希表中的，要从所有的键中选出一个最久未被访问的键，需要另外一个数据结构存储这些源信息，这显然不划算。最初，Redis只是随机的选3个key，然后从中淘汰，后来算法改进到了N个key的策略，默认是5个。
Redis3.0之后又改善了算法的性能，会提供一个待淘汰候选key的pool，里面默认有16个key，按照空闲时间排好序。更新时从Redis键空间随机选择N个key，分别计算它们的空闲时间idle，key只会在pool不满或者空闲时间大于pool里最小的时，才会进入pool，然后从pool中选择空闲时间最大的key淘汰掉。
真实LRU算法与近似LRU的算法可以通过下面的图像对比：
浅灰色带是已经被淘汰的对象，灰色带是没有被淘汰的对象，绿色带是新添加的对象。可以看出，maxmemory-samples值为5时Redis 3.0效果比Redis 2.8要好。使用10个采样大小的Redis 3.0的近似LRU算法已经非常接近理论的性能了。
数据访问模式非常接近幂次分布时，也就是大部分的访问集中于部分键时，LRU近似算法会处理得很好。
在模拟实验的过程中，我们发现如果使用幂次分布的访问模式，真实LRU算法和近似LRU算法几乎没有差别。
LRU源码分析
Redis中的键与值都是redisObject对象：
typedef struct redisObject {
unsigned type:4;
unsigned encoding:4;
unsigned lru:LRU_BITS; /* LRU time (relative to global lru_clock) or
* LFU data (least significant 8 bits frequency
* and most significant 16 bits access time). */
int refcount;
void *ptr;
} robj;
unsigned的低24 bits的lru记录了redisObj的LRU time。
Redis命令访问缓存的数据时,均会调用函数lookupKey:
robj *lookupKey(redisDb *db, robj *key, int flags) {
dictEntry *de = dictFind(db->dict,key->ptr);
if (de) {
robj *val = dictGetVal(de);
/* Update the access time for the ageing algorithm.
* Don't do it if we have a saving child, as this will trigger
* a copy on write madness. */
if (server.rdb_child_pid == -1 &&
server.aof_child_pid == -1 &&
!(flags & LOOKUP_NOTOUCH))
{
if (server.maxmemory_policy & MAXMEMORY_FLAG_LFU) {
updateLFU(val);
} else {
val->lru = LRU_CLOCK();
}
}
return val;
} else {
return NULL;
}
}
该函数在策略为LRU(非LFU)时会更新对象的lru值, 设置为LRU_CLOCK()值:
/* Return the LRU clock, based on the clock resolution. This is a time
* in a reduced-bits format that can be used to set and check the
* object->lru field of redisObject structures. */
unsigned int getLRUClock(void) {
return (mstime()/LRU_CLOCK_RESOLUTION) & LRU_CLOCK_MAX;
}
/* This function is used to obtain the current LRU clock.
* If the current resolution is lower than the frequency we refresh the
* LRU clock (as it should be in production servers) we return the
* precomputed value, otherwise we need to resort to a system call. */
unsigned int LRU_CLOCK(void) {
unsigned int lruclock;
if (1000/server.hz <= LRU_CLOCK_RESOLUTION) {
atomicGet(server.lruclock,lruclock);
} else {
lruclock = getLRUClock();
}
return lruclock;
}
LRU_CLOCK()取决于LRU_CLOCK_RESOLUTION(默认值1000)，LRU_CLOCK_RESOLUTION代表了LRU算法的精度，即一个LRU的单位是多长。server.hz代表服务器刷新的频率，如果服务器的时间更新精度值比LRU的精度值要小，LRU_CLOCK()直接使用服务器的时间，减小开销。
Redis处理命令的入口是processCommand:
int processCommand(client *c) {
/* Handle the maxmemory directive.
*
* Note that we do not want to reclaim memory if we are here re-entering
* the event loop since there is a busy Lua script running in timeout
* condition, to avoid mixing the propagation of scripts with the
* propagation of DELs due to eviction. */
if (server.maxmemory && !server.lua_timedout) {
int out_of_memory = freeMemoryIfNeededAndSafe() == C_ERR;
/* freeMemoryIfNeeded may flush slave output buffers. This may result
* into a slave, that may be the active client, to be freed. */
if (server.current_client == NULL) return C_ERR;
/* It was impossible to free enough memory, and the command the client
* is trying to execute is denied during OOM conditions or the client
* is in MULTI/EXEC context? Error. */
if (out_of_memory &&
(c->cmd->flags & CMD_DENYOOM ||
(c->flags & CLIENT_MULTI && c->cmd->proc != execCommand))) {
flagTransaction(c);
addReply(c, shared.oomerr);
return C_OK;
}
}
}
只列出了释放内存空间的部分，freeMemoryIfNeededAndSafe为释放内存的函数：
int freeMemoryIfNeeded(void) {
/* By default replicas should ignore maxmemory
* and just be masters exact copies. */
if (server.masterhost && server.repl_slave_ignore_maxmemory) return C_OK;
size_t mem_reported, mem_tofree, mem_freed;
mstime_t latency, eviction_latency;
long long delta;
int slaves = listLength(server.slaves);
/* When clients are paused the dataset should be static not just from the
* POV of clients not being able to write, but also from the POV of
* expires and evictions of keys not being performed. */
if (clientsArePaused()) return C_OK;
if (getMaxmemoryState(&mem_reported,NULL,&mem_tofree,NULL) == C_OK)
return C_OK;
mem_freed = 0;
if (server.maxmemory_policy == MAXMEMORY_NO_EVICTION)
goto cant_free; /* We need to free memory, but policy forbids. */
latencyStartMonitor(latency);
while (mem_freed < mem_tofree) {
int j, k, i, keys_freed = 0;
static unsigned int next_db = 0;
sds bestkey = NULL;
int bestdbid;
redisDb *db;
dict *dict;
dictEntry *de;
if (server.maxmemory_policy & (MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_LFU) ||
server.maxmemory_policy == MAXMEMORY_VOLATILE_TTL)
{
struct evictionPoolEntry *pool = EvictionPoolLRU;
while(bestkey == NULL) {
unsigned long total_keys = 0, keys;
/* We don't want to make local-db choices when expiring keys,
* so to start populate the eviction pool sampling keys from
* every DB. */
for (i = 0; i < server.dbnum; i++) {
db = server.db+i;
dict = (server.maxmemory_policy & MAXMEMORY_FLAG_ALLKEYS) ?
db->dict : db->expires;
if ((keys = dictSize(dict)) != 0) {
evictionPoolPopulate(i, dict, db->dict, pool);
total_keys += keys;
}
}
if (!total_keys) break; /* No keys to evict. */
/* Go backward from best to worst element to evict. */
for (k = EVPOOL_SIZE-1; k >= 0; k--) {
if (pool[k].key == NULL) continue;
bestdbid = pool[k].dbid;
if (server.maxmemory_policy & MAXMEMORY_FLAG_ALLKEYS) {
de = dictFind(server.db[pool[k].dbid].dict,
pool[k].key);
} else {
de = dictFind(server.db[pool[k].dbid].expires,
pool[k].key);
}
/* Remove the entry from the pool. */
if (pool[k].key != pool[k].cached)
sdsfree(pool[k].key);
pool[k].key = NULL;
pool[k].idle = 0;
/* If the key exists, is our pick. Otherwise it is
* a ghost and we need to try the next element. */
if (de) {
bestkey = dictGetKey(de);
break;
} else {
/* Ghost... Iterate again. */
}
}
}
}
/* volatile-random and allkeys-random policy */
else if (server.maxmemory_policy == MAXMEMORY_ALLKEYS_RANDOM ||
server.maxmemory_policy == MAXMEMORY_VOLATILE_RANDOM)
{
/* When evicting a random key, we try to evict a key for
* each DB, so we use the static 'next_db' variable to
* incrementally visit all DBs. */
for (i = 0; i < server.dbnum; i++) {
j = (++next_db) % server.dbnum;
db = server.db+j;
dict = (server.maxmemory_policy == MAXMEMORY_ALLKEYS_RANDOM) ?
db->dict : db->expires;
if (dictSize(dict) != 0) {
de = dictGetRandomKey(dict);
bestkey = dictGetKey(de);
bestdbid = j;
break;
}
}
}
/* Finally remove the selected key. */
if (bestkey) {
db = server.db+bestdbid;
robj *keyobj = createStringObject(bestkey,sdslen(bestkey));
propagateExpire(db,keyobj,server.lazyfree_lazy_eviction);
/* We compute the amount of memory freed by db*Delete() alone.
* It is possible that actually the memory needed to propagate
* the DEL in AOF and replication link is greater than the one
* we are freeing removing the key, but we can't account for
* that otherwise we would never exit the loop.
*
* AOF and Output buffer memory will be freed eventually so
* we only care about memory used by the key space. */
delta = (long long) zmalloc_used_memory();
latencyStartMonitor(eviction_latency);
if (server.lazyfree_lazy_eviction)
dbAsyncDelete(db,keyobj);
else
dbSyncDelete(db,keyobj);
latencyEndMonitor(eviction_latency);
latencyAddSampleIfNeeded("eviction-del",eviction_latency);
latencyRemoveNestedEvent(latency,eviction_latency);
delta -= (long long) zmalloc_used_memory();
mem_freed += delta;
server.stat_evictedkeys++;
notifyKeyspaceEvent(NOTIFY_EVICTED, "evicted",
keyobj, db->id);
decrRefCount(keyobj);
keys_freed++;
/* When the memory to free starts to be big enough, we may
* start spending so much time here that is impossible to
* deliver data to the slaves fast enough, so we force the
* transmission here inside the loop. */
if (slaves) flushSlavesOutputBuffers();
/* Normally our stop condition is the ability to release
* a fixed, pre-computed amount of memory. However when we
* are deleting objects in another thread, it's better to
* check, from time to time, if we already reached our target
* memory, since the "mem_freed" amount is computed only
* across the dbAsyncDelete() call, while the thread can
* release the memory all the time. */
if (server.lazyfree_lazy_eviction && !(keys_freed % 16)) {
if (getMaxmemoryState(NULL,NULL,NULL,NULL) == C_OK) {
/* Let's satisfy our stop condition. */
mem_freed = mem_tofree;
}
}
}
if (!keys_freed) {
latencyEndMonitor(latency);
latencyAddSampleIfNeeded("eviction-cycle",latency);
goto cant_free; /* nothing to free... */
}
}
latencyEndMonitor(latency);
latencyAddSampleIfNeeded("eviction-cycle",latency);
return C_OK;
cant_free:
/* We are here if we are not able to reclaim memory. There is only one
* last thing we can try: check if the lazyfree thread has jobs in queue
* and wait... */
while(bioPendingJobsOfType(BIO_LAZY_FREE)) {
if (((mem_reported - zmalloc_used_memory()) + mem_freed) >= mem_tofree)
break;
usleep(1000);
}
return C_ERR;
}
/* This is a wrapper for freeMemoryIfNeeded() that only really calls the
* function if right now there are the conditions to do so safely:
*
* - There must be no script in timeout condition.
* - Nor we are loading data right now.
*
*/
int freeMemoryIfNeededAndSafe(void) {
if (server.lua_timedout || server.loading) return C_OK;
return freeMemoryIfNeeded();
}